The Global Link RV Entry Door Locking Latch Kit # 295-000019 comes with unique keys. You can choose the keyed alike option and that will make the keys match between the locks you order but if someone else had the same latch I would expect the key to be different. I'm sure technically someone could have the same key since they don't make an infinite amount of unique keys/locks. The same is true for any other latch out there. However, the odds of someone actually having the same key and trying... view full answer...
Hi Phil; good question and the Furrion Arctic RV Refrigerator # FR42PJ does not have a lock for the doors to lock them while traveling. There isn't a separate latch or lock for this particular fridge, so if ensuring the doors are always closed is paramount, I would suggest considering a different option, the Everchill RV Fridge # EV77FR.
The # EV77FR is smaller, at about 11 cu ft compared to the 16 cu ft of the Furrion, but it does have a latch that can be used so the doors stay shut -... view full answer...
That we do, Larry. You did not mention exactly what model of FIC lock you have, but a Potential solution for you is the Global Link RV Entry Door Locking Latch Kit # 295-000019. This is a replacement for a standard entry door lock from a number of manufacturers including Fastec (FIC). It is 3.47" wide x 4.28" tall, fits doors that are 1-1/4" to 1-1/2" thick and will install into latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall.
If you can tell me what model of FIC... view full answer...
Hey Alfredo. Hopefully you can access your storage compartments from inside your trailer because that's where Bauer keeps the identifying information as to what replacement key you need. There's typically a sticker on the inner handle portion that sits inside your RV that you'll need to access. It's put inside there for security purposes so someone doesn't look up your lock core number and come back with the correct key.
I have linked our entire selection of replacement keys for Bauer... view full answer...
There is no way to order the Global Link RV Entry Door Locking Latch Kit # 295-000002 with a specific key. If you would prefer to keep matching keys the only option is to replace both at the same time and select the keyed alike. Otherwise, you will have to have separate keys for your entry doors. view full answer...
The Global Link RV Entry Door Locking Latch Kit # GL55VR has the single latch with two different functions/modes. The upper keyhole locks the outside handle but still allows it to be opened from the inside for emergency exit. When you use the lower keyhole you engage the integrated deadbolt system. The single plunger doubles as a deadbolt. The keypad has the same functionality as the lower keyhole. view full answer...
Hi Mike; the Ark Drop Down Corner RV Stabilizer Jacks # ARK77FR can be used in three different positions. At 30° and 60° they act as non-rated stabilizers. At 90° they have the 1,929 lb rating. view full answer...
Hey Margot, I'm not sure what you've got currently on your 1999 Safari Sahara but we do have plenty of replacement front door locks like the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019.
This replacement door lock will fit into doors that have a 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall cutout and doors that are1 1/4" to 1 1/2" thick, so if your door has a cutout within that range then you can use this.
If your door has a different cutout, let... view full answer...
The Camco Power Grip 90-Degree Locking Electrical Adapter # CAM55582 is exactly what you're looking for. This has a 50 amp female plug with the twist lock and a 30 amp male on the other end. view full answer...
I definitely agree with you there Dave, it would be a very nice option to have, but a 90 degree cord is not something made for the 50 amp SmartPlug RV Power Inlet and Connector # SM76FR.
I will say the way the plug connects does make it a better, more robust overall connection than the standard twist lock. Reason for that is the outside of the SmartPlug completely encompasses the inlet so there's less tension on the plug, and the lid clamps down on the plug for further support. So while... view full answer...
I am afraid we don't Marvin. It looks like that particular dead bolt lock is obsolete and there are no replacement parts available. If you are in need of a new one, we do offer one deadbolt lock, the Valterra Deadbolt Lock for RVs # L32CS3108. It looks like this has a much shorter deadbolt than the part you mentioned, so some modification would definitely be required in order to use it. view full answer...
Hi Jimmy,
The Global Link Locking Baggage Lock Actuator Set with Mounting Plate # GL34FR you referenced requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness of 0.7" to 1.25" thick. You can unscrew the back panel of your current latch to see the cutout hole and measure it. If you find that your cutout hole differs in size then let me know and I can look for an alternative. view full answer...
Hi Kent,
We do have an entry door latch for your Class C motorhome, though not a keyless door latch. You said 5" wide x 4-1/2" tall though the cutouts for the door locks require a 5-1/4" wide x 4-1/2" tall cutout. If you're okay with doing some slight trimming, what you can use is the following:
- Bauer Products Motorhome Door Lock # BA64FR view full answer...
Hey George, yes the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets # MO22FR would definitely work to beef up the rear bumper of your Coachman to allow it to carry your bikes and rack. view full answer...
Unfortunately we don't have any replacement keys for that, so your best bet is to replace the door lock assembly with something like Global Link RV Entry Door Locking Latch Kit # 295-000019. This fits doors that are 1-1/4" to 1-1/2" thick and it installs into latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. view full answer...
So from the looks of it John, the Mount-n-Lock HiLoHitch for 4.0" RV Bumpers - 2" Hitch Receiver # MNT47FR sounds like it's exactly what you're looking for.
This hitch mounts around your 4" x 4" RV bumper and provides a 2" receiver so you can mount your bike rack. This hitch also has a 300 lb capacity so it'll be plenty to handle your two e-bikes and bike rack. view full answer...
Michael, if you're replacing a Lippert 642066 lock then yes the Lippert Slam Latch for RV Door # LC54PJ will be a direct replacement.
If you aren't replacing that latch, you'll just have to make sure your cutout is 3-3/4" x 3-3/4" and your door is 1/2" thick; If it is, then you're good to go.
As far as warranties go, it should be through Lippert but I'd give them a call to make sure. view full answer...
The Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137 you asked from is 3-1/4 inches wide at the outside edge so it is not compatible with your 3.5 inch hole. The Furrion 30 Amp Power Inlet - White - LED # 431861 is 3-1/2 inches by 3-1/2 inches square.
My recommendation for you is the Furrion Replacement RV Power Inlet - 30 Amp Twist Lock - White # F30ITRPSAM which has a 4-1/2 inch diameter. view full answer...
We don't have just one 75' sewer hose, so the best we can do is recommend using 4 of the Camco HTS Standard RV Sewer Hose # CAM39611 and connect them using the Camco RV Sewer Hose Internal Coupler # CAM39203 which will give you 80' of hose.
To connect this hose to your RhinoFlex hose, you'll just need to attach the Camco RV Sewer Hose Straight Adapter w/ Bayonets # CAM39413 using the Camco RV Sewer Hose Twist-It Clamps # CAM39553. view full answer...
Go To Results